Product ID:BUTYL FLEX CAULK, 10005
MSDS Date:09/29/1988
FSC:8030
NIIN:00N017844
MSDS Number: BLCNQ

DAP INC

DAYTON, OH 45401-0277
US

Emergency Phone: 800-543-3840 513-253-7154

Info Phone: 800-543-3840 513-253-7154

Cage: 90300

DAP INC.

277 DAYTON, OH 45401-0277 US

Telephone: 513-253-7154/800-543-3840

Cage: 90300

STODDARD SOLVENT

CAS: 8052-41-3

RTECS: WJ8925000

Fraction By Weight: 5-10%

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM; 9293

VM&P NAPHTHA (LIGROINE)

CAS: 8032-32-4

RTECS: OI6180000

Fraction By Weight: 5-10%

OSHA PEL 300 PPM/400 STEL

ACGIH TLV: 300 PPM; 9192

TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 1-3%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

TALC (CONTAINING NO ASBESTOS)

CAS: 14807-96-6

RTECS: WW2710000

Fraction By Weight: 15-25%

OSHA PEL 2 MG/M3 RDUST

ACGIH TLV: 2 MG/M3 RDUST; 9192

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: MAY IRRITATE EYES, SKIN, NOSE &
RESPIRATORY TRACT. HARMFUL IF INHALED. HARMFUL OR FATAL IF
SWALLOWED. INGESTED: CAUSES VOMITING, DIARRHEA, & DEPRESSED
RESPIRATION. INHALATION: MAY AFFECT BRAIN OR NERVOUS SYSTEM
CAUSING DIZZINESS, HEADACHE, OR NAUSEA. CHRONIC: REPORTS HAVE ASSOC
(SEE EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: PROLONGED AND REPEATED OCCUPATIONAL
OVEREXPOSURE TO SOLVENTS WITH PERMANENT BRAIN & NERVOUS SYSTEM
DAMAGE.
Medical Cond Aggravated by Exposure:NONE KNOWN.

First Aid:EYE: FLUSH WITH LARGE AMOUNTS OF WATER FOR AT LEAST 15 MIN.
GET MD IMMED. SKIN: WASH IMMED WITH SOAP AND WATER. INHAL: REMOVE
TO FRESH AIR. CONTACT PHYS IMMED. INGEST: DO NOT INDUCE VOMIT.
CONTACT PHY S OR REGIONAL POISON CONTROL CENTER IMMED.

Flash Point Method:TCC
Flash Point:58.0F,14.4C
Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEMICALS.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . COOL EXPOED CONTAINERS WITH WATER.
Unusual Fire/Explosion Hazard:CONTR MAY EXPLODE IF EXPOS TO EXTREME
HEAT. ELIM SOURCE OF IGNIT: HEAT, ELECTRICAL EQUIP, SPARKS & OPEN
FLAMES. DO NOT PUT IN CONT W/OXIDIZING OR CAUSTIC MATL.

Spill Release Procedures:USE ABSORBENT MATERIAL OR SCRAPE UP DRIED
MATERIAL AND PLACE INTO CONTAINERS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP OUT OF REACH OF CHILDREN. KEEP
CONTR FROM EXCESSIVE HEAT, FREEZING. KEEP TIGHTLY CLSD WHEN NOT IN
USE. DO NOT STORE @ TEMP ABOVE 120F.
Other Precautions:INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING AND
INHALING VAPORS MAY BE HARMFUL OR FATAL. STORE AWAY FROM CAUSTICS &
OXIDIZERS.

Respiratory Protection:IF 8-HOUR EXPOSURE LIMIT OR VALUE IS EXCEEDED
FOR ANY COMPONENT, USE NIOSH/MSHA APPROVED RESPIRATOR. CONSULT YOUR
SAFETY EQUIPMENT SUPPLIER & THE OSHA REGULATION, 29 CFR 1910.134
FOR RESPIRATOR REQUIR EMENTS.
Ventilation:PROVIDE SUFFICIENT MECH VENT(LOC/GEN) TO MAINTAIN EXPOS
BELOW PEL & TLV. VAP ARE HEAVIER THAN AIR & WILL COLLECT(SUPDAT)
Protective Gloves:SOLVENT IMPERVIOUS GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES. (SUPP DATA)
Other Protective Equipment:SOLVENT IMPERVIOUS APRON, EYEWASH, BARRIER
CREAMS.
Work Hygienic Practices:WASH CONTAMD CLOTHING BEFORE REUSE.
Supplemental Safety and Health
VP: 30MMHG@100F(VM&P NAPHTHA). VENT: IN LOW AREAS. CHECK ALL LOW AREAS
(BASEMENTS, SUMP ETC.) FOR VAPOR BEFORE ENTERING.

HCC:F3
Boiling Pt:B.P. Text:212F,100C
Vapor Pres:SUPP DATA
Vapor Density:>1
Spec Gravity:1.46
Evaporation Rate & Reference:<1(N-BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:OPAQUE PASTE WITH A PETROLEUM DISTILLATE ODOR
Percent Volatiles by Volume:26.8

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS AND CAUSTICS.
Stability Condition to Avoid:EXCESSIVE HEAT.
Hazardous Decomposition Products:NORMAL COMBUSITON PRODUCTS, IE: CO*X,
NO*X.

Waste Disposal Methods:DISPOSE OF ACCORDING TO FEDERAL, STATE, AND
LOCAL REGULATIONS. DISCARDED MATERIAL SHOULD BE INCINERATE AT A
PERMITTED FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.